Line Thermal Printer DEP-50
62
63
User’s Manual
GS L n1 n2
Setting the left margin
[Code]
[1Dh] + [4Ch] + n1 + n2
[Range]
{0 <= n1 <= FFh}
{0 <= n2 <= FFh}
{n1+256*n2 < 384}
[Outline]
Sets the position in dots (1/203 inches) from which each
line starts. This command works only if entered at the
beginning of the line. The start position is equal to
n1+256*n2
dots from the left end of the printable area.
[Caution]
If a value that exceeds the length of the print area is set the
left margin is set to 0.
[Default]
Default value is 0.
(1) GS V m
(2) GS V m n
Cutting the paper
[Code]
(1) [1Dh] + [56h] + m
(2) [1Dh] + [56h] + m + n
[Range]
(1) {m=1, m=49}
(2) {m=66}
{0 <= n <= 255}
[Outline]
Depending on the value of
m
one of the following actions is
performed:
- if m=1 or m=49 (‘1’) a paper feed, so the last printed line remains
after the cover’s cutting edge is performed.
- if m=66 (‘B’) the paper is fed by n/8 mm.
In both cases the paper is first fed to the cut position so the
last printed line remains after the cutter’s edge. This means
at in case (2) the paper is fed by “cut po n/8”
millimeters total.
(1) GS k m [ d ] k NUL
(2) GS k m n [ d ] k
(3) GS k m a [ d ] k NUL
(4) GS k m a xL xH [ d ] k
Printing the barcode
[Code]
(1)
[1Dh] + [6Bh] + m + D
i
+ [00h]
(2)
[1Dh] + [6Bh] + m + n + D
i
(3)
[1Dh] + [6Bh] + m + a + D
i
+ [00h]
(4)
[1Dh] + [6Bh] + m + a + xL + xH + D
i
[Range]
(1)
{0 <= m <= 6}
(2)
{65 <= m <= 73}
(3)
{m=9; a=0,1}
(4)
{m=74; 256*xH+xL<=3000; a=0,1}
[Outline]
Specifying a type of barcode and printing barcodes.
•
The beginning of line is considered as the next printing start position.
•
Depending on the value of m, the following barcode can be selected.
d
indicates a barcode data to be printed and
k
indicates the number
of character to be printed.
n
indicates indicates number of characters when 65 <= m <= 73.
a
is a setting for PDF-417 barcode. Setting
a
=0 will make the printer
to automatically choose PDF-417 compression modes, while
a
=1
will force byte compression mode.
xL
and
xH
indicates the number of bytes for PDF-417 barcode
when
m
=74. The number of bytes is equal to
256*xH+xL
.
m
determines barcode type and it is one of the following:
