WIRED (ETHERNET)
IF YOU ARE CONNECTING THE DMS WITH WIRED ETHERNET,
DO NOT CONNECT THE TWO WI-FI ANTENNAS
.
This step assumes you have an active home network and router installed in your home.
1.
Place the DMS-650 within a cable run of your router or Ethernet port of which is wired back to the router.
2.
Connect
an
Ethernet cable
to the back of the DMS-650 and
plug the other end into your router, or Ethernet Port
.
3.
If connection is not automatically established,
Press
Menu
on the IR remote and
navigate to Network Settings
and
s
elect
Wired and DHCP
(for automatic configuration) and
press
Connect
. If you prefer assigning a manual IP
address, select Static and enter your Port number and IP address. However, DHCP is the most common method. If
you en
counter issues connecting, try to reset network by selecting “RESET
.
”
29
