TRUBIT™ DSD
AND PCM UPSAMPLING AND PCM TO DSD CONVERSION
Upsampling can be messy, leaving behind lots of digital artifacts resulting in noise and inaccurate signal generation. On the
surface, upsampling may seem like a good idea. But if not implemented properly it can be disastrous. Typically, upsampling
is done as a predefined one-size-fits-all approach, such as 96 kHz or 384 kHz. Utilizing a dedicated 128-bit DSP engine, Cary
Audio’s TruBit™ Upsampling allows for up to 10 different selectable sample rates and an increased bit depth of 32 bits
. The
result is a signal free from digital artifacts that sounds accurate, pure, and a joy to listen to.
What’s more
? PCM sources can
be converted to DSD (DSD64, 128, or 256). Alternatively, a lower native DSD source can be Upsampled to a higher DSD rate.
PCM to DSD conversion and DSD
upsampling takes our TruBit™ technology to whole new level of pure
silky-smooth analog-
like sound like never before from a digital source.
OSO™ RECLOCKING
Once a digital signal is transferred into Cary Audio’s digital ecosystem via the digital
inputs, it is processed with extreme
care to ensure the best possible sound achievable. As a digital source transfers from one point A to point B it creates an
insidious digital problem called ‘jitter
.
’ To deal with this, Cary Audio developed something we call OSO™ Re
-clocking. This
solution re-clocks all signals again once onboard to ensure all jitter is virtually eliminated to a minute degree. We call this
OSO™, short for “Onboard Signal Origination
,
” because this re
-clocking and buffering creates a signal so stable and jitter
free it is as if the origin of the signal was generated onboard and not from an external source.
13
