
NETWORK AUDIO OVERVIEW
PROMPTED WIRELESS (WI-FI) SETUP
This step assumes you have an active wireless home network and router installed in your home.
NOTE:
The quality and stability of the audio signal depends on the bandwidth and range of your Wi-
Fi router. This is especially true for exceptionally high-resolution files, such as DSD files or PCM files
greater than 192kHz. When possible, a wired (Ethernet) connection is preferred.
1.
Place the DMS-500/550/600 anywhere within the routers Wi-Fi range. Make sure BOTH Wi-Fi
antenna are connected.
2.
Turn on the DMS-500/550/600. Once on,
press
the
Network
Input Source on the IR remote.
The following prompt will display. To connect to Wi-Fi,
Press
YES
.
3.
Select your
Wi-Fi network
and
press
Enter
.
27