NETWORK AUDIO OVERVIEW
Reset
. Resets the DMS-500/550/600 to factory default.
WIRED (ETHERNET)
This step assumes you have an active home network and router installed in your home.
1.
Place the DMS-500/550/600 within a cable run of your router or Ethernet port of which is wired
back to the router.
2.
Connect an
Ethernet cable
to the back of the DMS-500/550/600 and plug the other end into
your router, or Ethernet Port.
3.
If connection isn’t automatically established,
Press
Menu
on the IR remote and navigate to
Network Settings.
Select
Wired
and
DHCP
(for automatic configuration)
and
press
Connect.
If you prefer assigning a manual IP address,
select
Static
and enter your Port
number and IP address. However, DHCP is the most common method. If you encounter issues
connecting, try to reset network by
selecting “
RESET
”.
26