MENU OPERATION
2.
Rear
o
Select
Rear
if there are IR sensors connected to the rear of the DAC-200ts for when
the unit is installed inside a rack or out of line of sight of the remote.
3.
Both
o
Select
Both
if both Front and Rear conditions apply and to be able to have flexibility
of controlling either way or simultaneously.
NETWORK ETHERNET AND WI-FI SETUP
The DAC-200ts comes with both an Ethernet Port and built-in Wi-Fi for connection to your network
for controlling the DAC-200ts via network control systems as well as iOS and Android Apps. Both
wired Ethernet and Wi-Fi can be set up simultaneously and for different functions. For example,
many integrated control systems (Crestron, Control4, AMX, etc.) prefer to have a separate dedicated
network just for the control system. In such a scenario, the DAC-200ts Ethernet port could be set
up on the dedicated network while the DAC-200ts Wi-Fi- could be setup on the user’s home
network. The advantage is that the user could use the iOS or Android app on their multi-use
smartphones or tablets to control the DAC-200ts while staying connected to their home network
while an integrated control system operating on a separate dedicated network could also control the
DAC-200ts allowing for maximum flexibility.
Ethernet
1.
Enable;
Yes
or
No
Yes
is the default setting. If Ethernet is not going to be use, you can select
NO
.
2.
IP Assign:
DHCP
or
Static
Select
DHCP
for an IP address to be assigned automatically to the DAC-200ts (most
common method).
(
If Static is selected, follow steps a & b
)
a)
Assign IP:
--- --- --- ---
Enter your desired IP address using the hand held remote control.
b)
Connect:
Yes
After entering your desired IP address,
select
YES
.
19
