5
INPUTS:
When the unit is first turned on, the Input A EQ screen will display. To adjust the Gain
(volume) of the selected input use the Adjust UP/DOWN buttons. The range is 0db at
maximum to -32db at minimum. To adjust the ‘faders’ press any of the 60 fader up/down
buttons to adjust that frequency from +12.0dB to -12.0dB. To get back to adjusting the
Gain of this channel press the Input select button again. To edit any of the other Inputs
press that channels Input Select button. Pressing any INPUT select button from any
screen, except when in the SYSTEM or UTILITY menus, will bring up that channels
screen. When you change from one INTPUT to another all the changes are saved in
memory.
The FLAT button will reset all the parameters on a channel to the ‘Flat’ (0 or OFF)
settings except for the GAIN.
OUTPUTS:
The Outputs will all be muted on power up and each must be un-muted individually using
the Output Mute buttons. A muted channel is indicated by the PEAK (Red LED) staying
on constantly and no signal light on that Output channel.
To edit the output parameters, press the output select button for the desired channel. Use
the CURSOR UP/DOWN/LEFT/RIGHT buttons to move the cursor to the parameter you
