STARJET™ POOL WATER JET |
USER MANUAL
3
STEP 4
Remove the
top ledge cover.
STEP 5
Pass the water tubing under the top ledge to the furthest location of a StarJet.
STEP 6
Pass the tubing through the top seat cable passthrough from top ledge to top ledge all around
the pool, until you reach the StarJet 4-May Manifold.
STEP 7
Cut a 30 cm (12-inch) section from the water tubing roll. Pass this piece of tubing through the top
ledge and through the StarJet top ledge cover.
STEP 8
Screw the StarJet top ledge cover adaptor to the front top ledge cover.
STEP 9
Connect the water tubing to the 45
°
fitting under the StarJet tank.
STEP 10
If StarGlow lights are already installed on the pool, you can connect StarJet light inline with the
StarGlow lights.
Refer to StarGlow or Star Series Starter Kit user manual to learn more about how to connect
cables to the StarJet. Respect the power chart recommendations from those user manuals.
STEP 11
Hide the cable and tubing under the StarJet shell.
STEP 12
Screw the StarJet shell assembly to the StarJet top ledge cover.
