LC24 SPECIFICATIONS:
Power input:
DC12v-18V 500mA.
DMX output:
3pin XLR
MIDI output:
5 pin DIN
Audio Mic :
internal
Audio input:
RCA jack
Remote input:
stereo 1/4"
Internal fuse:
0.5A 250V 5x20mm
Dimensions:
19x10.4x3.4 inch.
AC adapter:
120VAC – 12VDC 500mA
Weight:
10.6 lbs
MIDI IN SETTINGS
1.) Press and hold RECORD
2.) Press 1st FLASH KEY 3 times, then release RECORD.
When CHI appears on display you can select MIDI IN
channels from the 1ST FLASH to the 16TH FLASH.
3.) After you press the desired FLASH, the appropriate
channel LED is lit.
4.) Press RECORD and EXIT to withdraw MIDI IN settings.
A. MIDI OUT SETTINGS
1.) Press and hold RECORD
2.) Press 2nd FLASH KEY 3 times, then release RECORD.
When CHO appears on the display you can select MIDI IN
channels from the 1ST FLASH to the 16TH FLASH.
3.) After you press the desired FLASH, the appropriate
channel LED is lit.
4.) Press RECORD and EXIT to withdraw MIDI OUT settings.
B. RECEIVE FILE DUMP
1.) Press and hold RECORD
2.) Press 3rd FLASH KEY 3 times, then release RECORD.
When IN appears on display it is ready to receive file
dump.
3.) All other operation are void when receiving file dump.
The LC24 will automatically cease transfer when com-
plete. A file dump will cease if an error occurs during
transfer or if the power is interrupted.
C. SEND FILE DUMP
1.) Press and hold RECORD
2.) Press 4th FLASH KEY 3 times, then release RECORD.
When OUT appears on display it is ready to send file
dump.
3.) All other operation are void when receiving file dump.
The LC24 will automatically cease transfer when com-
plete. A file dump will cease if an error occurs during
transfer or if the power is interrupted.
D. FILE DUMP CONNECTIONS
OPEN LOOP MODE
CLOSED LOOP MODE
NOTE:
When sending file dump with an OPEN LOOP MODE, you
should set up the receiving device to RECEIVING MODE
or receiving will be disabled.
1. If MIDI data is not received within 10 minutes, the
channel and program set too MIDI will be cleared.
2. When sending or receiving a file dump, the device ID is
55H. All information is sent or received during a file
dump. You can send SCENE programs to an external
storage or to another unit. You can also receive SCENE
programs from external storage or from another unit.
This unit sends or receives NOTE information , relevant
functions is as follows:
NOTE NUMBER
VELOCITY
FUNCTION
22-69
PROGRAM MASTER
ON-OFF PROGRAM 1-48
70-93
CHANNEL DIMMER
ON-OFF PROGRAM 1-24
94
FULL ON
95
DARK
96
HOLD
97
TURN ON /OFF AUDIO CHASE
98
CHASE SCENES
99
DOUBLE PRESET MODE
100
SINGLE PRESET MODE
101
STEP CHANGE
102
BLACK OUT
RECEIVING INSPECTION—read before getting started
INSPECT YOUR MIXER FOR ANY DAMAGE which may have
occurred during shipping. If any damage is found, please
notify the shipping company and CARVIN immediately.
SAVE THE CARTON & ALL PACKING MATERIALS. In the
event you have to re-ship your unit, always use the original
carton and packing material. This will provide the best pos-
sible protection during shipment. CARVIN and the shipping
company are not liable for any damage caused by improper
packing.
SAVE YOUR INVOICE. It will be required for warranty ser-
vice if needed in the future.
SHIPMENT SHORTAGE. If you find items missing, they
may have been shipped separately. Please allow several days
for the rest of your order to arrive before inquiring.
RECORD THE SERIAL NUMBER on the enclosed warranty
card or below on this manual for your records. Keep your
portion of the card and return the portion with your name
and comments to us.
TRANSMITTER
RECEIVER
MIDI OUT MIDI IN
MIDI OUT MIDI IN
TRANSMITTER
RECEIVER
MIDI OUT MIDI IN
MIDI OUT MIDI IN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SAFETY INSTRUCTIONS (EUROPEAN)
The conductors in the AC power cord are colored in accordance with the following code.
GREEN & YELLOW—Earth BLUE—Neutral BROWN—Live
U.K. MAIN PLUG WARNING: A molded main plug that has been cut off from the cord is unsafe. NEVER
UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED OR CUT MAIN PLUG INTO A POWER SOCKET.
IMPORTANT! FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:
WATER AND MOISTURE: Appliance should not be used near water (near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure through openings.
POWER SOURCES: The appliance should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polariza-
tion means of an appliance is not defeated.
POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit from the appliance.
SERVICING: The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to qualified service personnel.
FUSING: If your unit is equipped with a fuse receptacle, replace only with the same type fuse. Refer
to replacement text on the unit for correct fuse type.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL!
This symbol is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to consti-
tute a risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servic-
ing) instructions in the literature
accompanying the appliance.
LIMITED WARRANTY
Your Carvin product is guaranteed against failure for 1 YEAR unless otherwise stated. Carvin
will service and supply all parts at no charge to the customer providing the unit is under warranty.
Shipping costs are the responsibility of the customer. CARVIN DOES NOT PAY FOR PARTS OR
SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL INVOICE IS REQUIRED TO
VERIFY YOUR WARRANTY. Carvin assumes no responsibility for horn drivers or speakers dam-
aged by this unit. This warranty does not cover, and no liability is assumed, for damage due to:
natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect use, or failure
to follow instructions. This warranty is in lieu of all other warranties, expressed or implied. No
representative or person is authorized to represent or assume for Carvin any liability in connec-
tion with the sale or servicing of Carvin products. CARVIN SHALL NOT BE LIABLE FOR INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES.
When RETURNING merchandise to the factory, you may call for a return authorization number.
Describe in writing each problem. If your unit is out of warranty, you will be charged the cur-
rent FLAT RATE for parts and labor to bring your unit up to factory specifications.
MAINTAINING YOUR EQUIPMENT
Avoid spilling liquids or allowing any other foreign matter inside the unit. The panel of your
unit can be wiped from time to time with a dry or slightly damp cloth in order to remove
dust and bring back the new look. As with all pro gear, avoid prolonged use in caustic
environments (salt air). When used in such an environment, be sure the mixer is ade-
quately protected by a cover.
For your records, you may wish to record the following information.
Serial No.________________________________ Invoice Date_______________
