released the scene program is locked so that chase speed
and other programs can be set to new chase speeds. To return
a Scene program’s chase speed control to the speed fader,
place the Speed fader in the bottom SHOW MODE position.
Press and hold the REC SPEED button along with the Scene
programs FLASH button upon release of both buttons the
control is restored.
26.) DARK BUTTON
The DARK button is like a momentary version of the
BLACKOUT button. Except the DARK button cannot be over
ridden by any other button while still pressed.
27.) ALL REV BUTTON / EDIT
The ALL REV button works in the Scenes mode. It reverses
the direction of the chase for all scene programs running
whether or not a chase speed was set using the Rec Speed
button. In record Mode and in Scene mode the alternate Edit
function pressed in conjunction with a scene flash button
puts the console in the edit mode of that scene program.
See Record Mode.
28.) % OR 0-255 / INSERT BUTTON
The % OR 0-255 button is used to change the dimmer read-
out on the LED display from 0-100% to 0-255 steps. This
is only a display reading preference. The function toggles
every time the RECORD and "% OR 0-255" buttons are
press and the same time. The alternate Insert function works
in the record Edit mode. It is used to insert a new step into
an existing program.
29.) REV ONE / DELETE BUTTON
The REV ONE button reverses the scene program who’s
FLASH button is pressed at the same time. The alternate
Delete function works in the record Edit mode. It is used to
delete a new step into an existing program.
30.) CHASE REV / UP BUTTON
The CHASE REV button works in the Scene mode and
reverses the chase direction of the any programs running
to a chase speed it will not rev scene programs that have
their chase speed set by using the REC SPEED button. The
UP function works in the record Edit mode. It is used to
change the dimmer intensity in an existing program. In the
record Edit mode, a steps dimmer intensity value is changed
by pressing and holding the UP button, then as the FLASH
button under the channel to be modified is pressed the inten-
sity is increased. The alternate Chase Rev function works
in the Scene mode and reverses the chase direction of the
any programs running to a chase speed it will not rev scene
programs that have their chase speed set by using the REC
SPEED button.
31.) BEAT REV / DOWN BUTTON
The BEAT REV button works in the Scene mode with scene
programs that have their chase speed set by the REC SPEED
button and are now running with other programs with audio
chase activated. The Set Speed chase programs will reverse
on the next beat (may have to hold the button for two beats)
after the button is released.
The alternate Down function works in the record Edit mode.
It is used to change the dimmer intensity value of a step in
an existing program. In the record Edit mode, a step’s dimmer
intensity value is change by pressing and holding the Down
button, then as the Flash button under the channel to be mod-
ified is pressed the intensity is decreased.
REAR PANEL CONTROLS:
32.) POWER INPUT JACK
Use supplied AC wall adapter.
33.) MIDI THRU
Use for serial connections of more MIDI devices connected
after the LC24. Has same MIDI information as going into
the MIDI in jack.
34.) MIDI OUT
Use for send out MIDI information from the LC24.
35.) MIDI IN
Used for receiving MIDI information into the LC24.
36.) DMX OUTPUT
Used for send information to Dimmer packs etc.. in the DMX-
512 format.
37.) DMX POLARITY SELECT
Reverses the polarity of the balanced DMX lines. Used if
Dimmer packs etc.. used with the LC24 only conform to a
certain polarity. See Dimmer pack and other peripherals for
correct polarity. The polarity will not damage peripherals,
but they may not function properly with an incorrect setting.
38.) THE AUDIO INPUT
The audio input jack when used turns off the internal micro-
phone. I can handle from 100mV to 1V pp and is controlled
by the audio fader. This jack is used to control the chase rate
of a scene program with an audio source.
39.) REMOTE CONTROL INPUT:
The stereo (TRS) 1/4" jack is used to remotely control the
Full On and Black Out features of the console. The tip is the
Full On control. It works in either momentary hold or push
on push off. The Ring is the
Black Out control and works as
push on / push off. This is the
same are these switches work
on the front console.
1
2
3
4
5
6
7
8
9
10
11 12
13 14 15 16
17
18
20
19
21
22
23
24
25
26
27
28
29
30
31
LC24 REAR CONNECTIONS
32
33
34
35
36
37
38
39
