Carver 396 Motor Yacht 2003, Руководство пользователя, Страница: 186 / 234

W
INTERIZATION AND
S
TORAGE
S
ECTION
8
174
3808 5/99
3. Switch the Pressure Water Pump circuit breaker on
the DC Control Center "ON".
4. Open the galley sink cold water faucet. When a
steady stream of antifreeze flows from the tap, close
the faucet. Repeat this step for the galley hot water
faucet, then for each cold and hot water faucet on
the boat, except for the optional transom hand
shower and bow and transom fresh water
washdowns.
For the transom shower, place the shower head in a
bucket before turning on the shower faucet. This
catches the antifreeze, which can be reused. Pro-
ceed as described earlier in this step.
For the bow and transom fresh water washdowns:
a. Remove the hose(s) from the fresh water
washdown fittings.
b. Place a bucket under the washdown fittings to
catch the antifreeze, which can be reused.
c. Open the washdown faucets. When a steady
stream of antifreeze flows from the fittings, close
the faucets.
5. Pour one or two quarts of the antifreeze into each
shower drain until the sump pumps turn ON.
6. Pour a quart of the antifreeze into each sink drain.
Preparing the System for Use Again
When you remove your boat from storage and prepare to
use it again, flush the entire fresh water system with
fresh water. Nontoxic antifreeze is colored, so the water
system is adequately flushed when uncolored water
flows from all of the faucets and shower heads.
Before performing this procedure on the optional raw
water washdowns, your boat should be pulled from the
water.
Raw Water
Washdowns