Carver 12-10, Руководство по эксплуатации, установке и обслуживанию

Страница: 7 / 104

Carver Inc 2-2
•
breakdown of shop morale
•
costly damage to press and/or tooling
•
down time.
An effective press safety program is not only humanitarian, but is also economically sound.
Organize a safety committee or group, and hold regular meetings. Promote this group from the management level.
Through this group, the safety program can be continually reviewed, maintained, and improved. Keep minutes or a
record of the meetings.
Hold daily press inspections in addition to regular maintenance checks. You will keep your presses safe for production
and exhibit your commitment to safety.
Please read and use this manual as a guide to molding machine safety. This manual contains safety warnings
throughout, specific to each function and point of operation. It is to promote and increase safe press operation in your
company.
2.3 OPERATOR RESPONSIBILITY
It doesn't end with fast and efficient production. The press operator usually has the most daily contact with the press and
intimately knows its capabilities and limitations.
Plant and personal safety is sometimes forgotten in the desire to meet incentive rates, or through a casual attitude toward
machinery formed over a period of months or years. Your employer probably has established a set of safety rules in your
workplace. Those rules, this manual, or any other safety information will not keep you from being injured while
operating your press.
ONLY YOU can make safety work for you by constantly thinking about what is safe and what is not. It is often the "just
once" that a press operator reaches into a press to remove or adjust material, or rest a hand in the ram area while talking
to a co-worker that results in serious injury.
Learn and always use safe press operation. Cooperate with co-workers to promote safe practices. Immediately report
any potentially dangerous situation to your supervisor or appropriate person.
REMEMBER:
•
NEVER place your hands or any part of your body in the mold area or other dangerous locations.
•
NEVER operate, service, or adjust press or molds without the appropriate training and first reading and
understanding this manual.
•
NEVER try to pull material (either a part or scrap) out of the mold with your hands! If a part sticks in the
mold, stop the press and call your supervisor.
•
NEVER place your hands or any part of your body in the mold area or other dangerous locations. In
addition to the crushing hazard presses equipped with heated platens present a hazard of burn from hot
platen and mold surfaces.