Carver 12-10, Руководство по эксплуатации, установке и обслуживанию

Страница: 37 / 104

Carver Inc 9-2
SECTION NINE WARRANTY
9.1 WARRANTY RETURNS
1. Prior to the return of any material, authorization must be given by
CARVER, INC
. An RMA number will be
assigned for the part or equipment to be returned.
2. Reason for requesting the return must be given.
3. All returns are to be shipped prepaid.
4. The invoice number and date, or purchase order number and date, must be supplied.
5. After inspecting the material, a replacement or credit will be given at
CARVER's
discretion, if the item is
found to be defective in materials or workmanship and it was manufactured by
CARVER, INC.
Purchased
components are covered under their specific warranty terms.
9.2 WARRANTY
CARVER, INC. warrants all equipment we manufacture to be free from defects in workmanship and materials when
used under recommended conditions. The Company's obligation under this warranty is limited to those parts which,
within twelve (12) months from delivery of equipment to original purchaser, are returned to the factory with
transportation prepaid, and upon examination shall be found to be defective.
CARVER
neither assumes, nor authorizes any other persons to assume any liability in connection with the sale of its
equipment, except under the conditions of this warranty.
This warranty does not cover any labor charges for replacement of parts, adjustment, repair, or any other work done.
This warranty shall not apply to any apparatus which, in our opinion, has been subjected to misuse, negligence, or
pressures in excess of the limits recommended, or which shall have been repaired or altered outside of the factory.
Replacement of defective material(s) will be FOB from the
CARVER, INC.
factory. Replacement of component parts
not manufactured by
CARVER, INC.
will be limited to the warranty of the manufacturer of such parts.