Cartoni P90, Руководство пользователя / Техническое обслуживание

Страница: 18 / 28

18
3.2 P
ressurIzIng the
P
edestal and
b
alanCIng the
l
oad
The compressed air provided to the product must be dry, without oil and dust.
The pneumatic power should be provided through the intake valve (28) using the manual pump which is
included with the product or by means an air-compressor.
The column should be filled with clean pressurized air or nitrogen until it compensates the weight of the
Camera configuration.
To pressurize the Pedestal connect either the manual air pump provided with the system or an air-com-
pressor to the intake valve (28), by screwing in the pump connection.
Inflate the system until the column rises and reaches and maintains the top upper position.
Remove the air intake connection.
Bleed the air excess, pushing the pin in the intake valve (28) until the Camera moves freely up & down
through the entire range of the column stroke.
3.3 t
rIm
W
eIghts
According to variations of the Studio air temperature, the balance could be affected in excess or defect:
act on trim weights, adding or removing one or more units, to match the perfect balance.
The Pedestal is supplied with six (6) trim weights of 1,3 Kg (2.9 lbs) each, which can be placed in the seats
on the steering wheel plaque. When not needed, the counterweights can be stored in dedicated spaces
(14) on the skid.
!
Before pressurizing the Pedestal it is necessary to unlock the column by releasing the
safety latch (26).