9
START-UP (continued)
ZONE PRESSURE TESTING
Adequate water pressure is needed for the irrigation system to function properly. Follow this procedure
to test the flow of the water to the growing zones.
1) On the HOME screen, press the SETUP button
2) On the SETUP screen, press the SET WATER button
3) On the SET WATERING screen, find the option for zone 1 or 2 and press the water droplet button
on the right side
4) Observe water flow into each drawer
5) The pressure is adequate if the water hits the drawer 4-5 inches from the outlet of the tube
6) To stop watering, press the same water droplet button again
7) Press DONE to return to the SET UP screen
8) Press the HOME button to return to the HOME screen
HOME SCREEN
SET UP SCREEN
SET WATERING SCREEN
WATERING ZONES
1
2
3
4
5
