10
Temperature and humidity in the cabinet are provided by ambient as well as cabinet lights and water
reservoir. If either value goes above the set value, fans will turn on to reduce the cabinet temperature
and/or humidity. Temperature and humidity may be set for each side of the cabinet. ZONE 1: left side;
ZONE 2: right side.
1) On the HOME screen, press the SETUP button
2) On the SETUP screen, press the SET fans button
3) On the SET TEMPERATURE screen, you will see a temperature and humidity button for each zone.
Press the + and - buttons to set the values for the temperature and humidity for each zone.
4) Press DONE to return to the HOME screen
PROGRAMMING
HOME SCREEN
SETTING THE DATE AND TIME
HOME SCREEN
1) On the home screen, press the date/
time in the upper right hand corner.
This will take you to the TIME AND
DATE SCREEN.
2) Using the UP and DOWN arrows, set
the date and time.
3) Press DONE when you are finished.
The date and time are now set so you can
accurately program and monitor the growing
cycles.
TIME AND DATE SCREEN
SETTING TEMPERATURE AND HUMIDITY
SETUP SCREEN
SET TEMPERATURE SCREEN
The cabinet must be plugged in and plumbed by a
professional technician. Follow start-up procedures
for the cabinet before programming and growing
(see pages 7-9).
Follow these steps to set up your GardenChef and
begin growing.
HOME button:
pressing this
button on any screen where it
appears will return the controller
to the HOME screen.
