GB
// 28
Output 1:
Left indicator
Output 2:
Light 1
Output 3:
Light 2
Output 4:
Right indicator
Brief in range A:
1 x switches light 1 on (memory)
2 x switches light 2 on (memory)
3 x switches light 1 and light 2 off again
In range A:
Switches left indicator on (momentary)
In range D:
Switches right indicator on (momentary)
Brief in range D:
Switches hazard warning lights on or off (memory)
In this mode, the Switch 4/15P. is connected to the steering channel of the receiver with a Y-cable, parallel to the steering servo. When steering around a bend, the indicators are activated
automatically. This requires the neutral position of the steering channel should be set to 1,500 ms on the transmitter.
In addition to the indicators on the right and left, 2 further outputs for 2 lights, as well as the hazard lights (right and left indicators at the same time) can be switched. To this end, the channel must
be very briefly (max. 300 ms) moved to ranges A or D and then immediately back to the neutral position.
The intermediate ranges B and C are not evaluated in this mode.
Assignment of the outputs:
Function control:
The size of the neutral range can be changed using the „digital potentiometer“ (see page 23):
MODE 10: BLINKERS (STEERING), HAZARD LIGHTS, LIGHTS 1+2
DIGITAL POTENTIOMETER
LEDS
NEUTRAL RANGE
0
1.52 - 1.48 ms
1
1.56 - 1.44 ms
2
1.60 - 1.40 ms
3
1.64 - 1.36 ms
4
1.68 - 1.32 ms
5
1.72 - 1.28 ms
6
1.76 - 1.24 ms
7
1.80 - 1.20 ms
Left indicator
Light 1 + Light 2
Right indicator
Hazard lights
Содержание Reflex
Страница 34: ...34 NOTIZEN NOTES ...
Страница 35: ...35 NOTIZEN NOTES ...
