Carson Rapscallion brushless, Инструкция по эксплуатации

Страница: 25 / 32

25 CARSON Rapscallion brushless 500108010
GB
f. Brushless Drive Instructions
Attention
Please place the model on the ship stand provided in the scope of
delivery so that the propeller cannot come into contact with objects
or people in the event of unintentional activation.
Safety comes first!
Brushless speed controller with water cooling:
Constant current 30A
Max. current for short periods 60A
Operating voltage
3S LiPo Akku 11,1V
BEC output 5,5V/3A
Size 40x24x11 mm
Weight 27 g
Component connecting diagram
The components must be connected as shown in the
following diagram.
2. Start-up
The components must be connected as shown in the following
diagram.
a. Move the throttle of the remote control to the neutral position
(zero point).
b. Connect the provided and fully charged driving battery to the
speed controller.
c. Wait for approx. 2 seconds until the speed controller has determined
the voltage of the connected battery. The controller returns the
appropriately determined value using "beeps":
- If a 7.4V LiPo battery is being used, the controller emits 2 "beeps".
- If a 11.1V LiPo battery is being used, the controller emits 3 "beeps".
If the speed controller does not emit any "beeps", the voltage of the
connected battery is not within the permitted range.
Example:
The voltage range of the speed controller is between 2S-6S LiPo.
(7.4-22.2V) If a battery with a lower or higher voltage is connected,
the speed controller will not emit a beep.
Attention!
The brushless motor installed in the model is only designed for operating
up to 3S LiPo batteries (11.1V). For this reason, only use the original
Carson 11.1V LiPo driving battery. A battery with a higher voltage
would damage the motor.
d. After several "beeps", 2 short beeps will be heard. This indicates
that the brushless drive can now be started up.
Brushless motor with water cooling:
Speed 3100KV/3100 rpm/per V
Battery up to 3-cell LiPo batteries
Propeller 40x32 mm
1. Technical information for brushless drive
CH1
CH2 ESC
Motor Wire
Power Wire