Safety instructions
The charging of the three battery types can occur either
Please read the operating instructions before using the
individually or simultaneously. The charging time can be
unit for the first time.
calculated as follows:
Only use the unit in enclosed spaces.
battery capacity mAh
Only for NiMH batteries.
Charging time (hours) = 1.4* -----------------------------
Never attempt to recharge dry batteries.
charging current mA
Ensure that the battery’s capacity matches the charging
current of the unit.
During the charging process, the charger unit and
Keep small children away from the unit while charging.
batteries will heat up slightly (towards the end of the
Children should only operate the charger unit if
charging period).
supervised by an adult.
Allow heated batteries to cool prior to charging.
• When charging a battery, the relevant LED will light up.
If a battery becomes very hot (>40°C, battery poss.
• Remove the battery from the charger at the end of the
defective), disconnect the power plug.
charging period (disconnect plug).
Never use the charger as a direct current supplier for
• In the event of a defect (heat build-up) disconnect the
electrical appliances.
power plug and remove the batteries from the charger
unit.
Insert the power plug of the charger into a standard
domestic socket outlet. Connect the plug for charging the
receiver pack (4 cells) to the charger plug, pay attention
to the connector force, do not apply power. Red cable
plus / black cable minus. The charger plug for the glow
plug battery (1 cell) is connected to this similar to a glow
plug. Never connect to a starter system, which obtains
the glow plug voltage by means of reduction through a
battery with a higher voltage!
Rechargeable battery types
Transmitter battery/ies 9,6Volt (1,2Vx8 cells, NiMH)
Disposal
Receiver battery/ies 4,8Volt (1,2Vx4 cells, NiMH)
Please note and understand the symbols on this product,
Glow plug battery 1,5Volt (1,2Vx1 cell, NiMH)
packaging or instructions. Electronic components are
valuable materials and at the end of their useful
Charging process
life should not be disposed with household
waste! Help us to protect the environment and
safeguard our resources by discarding this
equipment at a dedicated recycling point. The
authority responsible for waste disposal or
your retailer will be able to answer any
questions you may have in this respect.
Specifications
Input voltage
AC voltage 230V 50Hz 11 W (max)
Output voltage 1
12V DC
without load
Output voltage 2
6V DC
without load
Output current 1
200 mA
Output current 2
200 mA
Output voltage 3
1,5V DC
without load
Output current 3
300 mA
Service-Hotline:
(8.00 Uhr -17.00 Uhr)
(01805) 73 33 00
14 ct/min
Dickie-Tamiya GmbH & Co KG
Mittlere Motsch Str. 9
96515 Sonneberg
Charging jack
for transmitter
Polarity of charging jack
LED1 Glow plug battery 1,5V
LED3 Transmitter batteries 8x1,2V 9,6V
LED2 Receiver batteries 4x1,2V 4,8V
Charging jack for
receiver battery/ies
Charging jack for glow plug battery
9,6V = 200mA
Power plug
4,8V = 200mA
1,5V = 300mA
Charger unit art. no. 50 060 6033
For charging transmitter, receiver and glow plug
batteries
