![Carscop CCTR-810 Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/carscop/cctr-810/cctr-810_user-manual_2564377003.webp)
Green Flash twice
: GSM network is OK but the GPS signal is weak
Green Flash quickly
: Incoming a call or making a call.
Green Always ON
: system is searching for the GSM network.
Green Always OFF
: System power off
RED Flash once
: Uploading location to website
RED Flash twice
: Recording location to memory
RED Always OFF
: GPRS and GPS power off
GSM LED Indicator (BLUE LED)
Flash quickly
: Searching the GSM network
Flash slowly
: The GSM signal is good
GPS LED Indicator (GREEN LED)
Always On
: Searching for the GPS signal
Flash Slowly
: GPS signal is good
4. Recharge and power supply
�
Warning: this tracker only uses the 9-28V DC power supply, too high voltage or AC voltage may
damage the tracker or even cause accidents, so please check the power supply first before
installing.
�
After the backup battery is full, the built in recharging circuit will stop recharging, and if the tracker
do not move, the tracker will go to sleep, then the tracker will cost few power and will not make the
car battery can not start car engine.
5. Back to default set (Factory configuration)
Power off the system, press the external “SOS” button and don’t release, switch the power switch
to ON position to power on the system, a few seconds later the GREEN LED will flash 10 times and
turn ON continuously, and then release the “SOS” button, the tracker is back to default configuration.
Notes: After back to default set, all IP / APN / GPRS / TIME ZONE
setting are deleted and back to default, all preset phone number are deleted
and password change to 123456, all the alarm setting is cancelled, if the
IP/APN/GPRS name& password/TIMEZONE have been changed, you need
set these again by sending SMS.
6. ANTENNA