�
Cut Oil Power (Remote Turn Off Car Engine)
Login in the platform, click the “Cut oil power” menu in the left bottom windows, and a menu will pop up,
search and select a car first, enable the “close circuit” or “Close Oil Supply”, and input the “Verify
Password” defined in the “Terminal Management” menu (If the verify password is not right, please contact
you dealer to reset the password), and click “Send” , the instruction will send to the tracker by the platform,
and this will cut the relay connection, and then the car engine will be turned off.
The same operation, click the “Cut oil power” menu in the left bottom windows, and a menu will pop up,
enable the “open circuit” or “open Oil Supply”, and input the “Verify Password” defined in the “terminal
Management” menu, and click “Send” , the instruction will send to the tracker by the platform, and this will
make the cut relay back to connection state, and then the car engine will be can be turned on.
Also you can Send SMS “STOPENGINE*123456” to tracker, “STOPENGINE” is a command, “123456”
is password, the car engine will be turned off immediately. The tracker will send back information “Car
Engine turn off”, if the password is not right, the operation is fault, the tracker will send back information
“Wrong Password”.
Attention: Turning off engine is very dangerous when car is driving, this will make the car
difficult to control and maybe cause a accident, so we recommend make the relay cut the
start motor wire, this will make you can not remote turn off car engine, but you can make the
car engine can not be started.
A relay is need to install to turn off the car engine, and also a diode is necessary to add to protect the
tracker driving wire, the diagram is as follow:
