background image

17 

 

6.2 Skip Error 

 

Skip source bad sectors.

 

Scroll to select "6.3 Skip Bad Sectors”, then press "OK" to scroll through the 
available values for skipping bad sectors. If the device data is critical and needs 
to be a full clone, it is recommended to set “Skip Bad Sectors” at "0.” Bad 
sectors can be set as unlimited or at a value from 0 to 65,535.

 

 
 

 

 

6.3 Language 

 

Scroll to select "6.6 Language”, then press "OK.” Next, scroll through and select 
the desired language.

 

 

 

6.4 Advanced Setup 

This function contains menus to fine-tune copy and erase functions.

 

Scroll to select "6.7 Advanced Setup”, then press "OK" to view the submenus.

 

 

6.4.1 Unknown Format 

This function only works with “6.2.1 Copy Area >> System and Files.”

 

Scroll to select "6.7.1 Unknown”, then press "OK”. Then scroll through to select 
one of two settings.

 

Unknown format includes all forms of modified and proprietary data and 
partitions.

 

 

Copy Unknown 

Copy unknown format(s).

 

Scroll to select "6.7.1 Unknown Format >> Copy Unknown”, then press "OK" to 
save this setting.

 

Caution 

The 

“Copy+Compare” function is advised for enhanced copy 

accuracy. 

[Skip Error] 

 

Содержание Pro118






















Отзывы: