background image

12 

 

4.3 DoD Erase 

This function will erase all data per DoD 5220.22-M Standards on the 
connected device(s).

 

Scroll to select "4.3 DoD Erase", then press "OK" to start the erasing process.

 

 

 

 

 

 

 

4.4 DoD EraseComp 

This function will erase all data per DoD 5220.22-M Standards, then verify 
erasure of the connected device(s).

 

Scroll to select "4.4 DoD EraseCom", then press "OK" to start the erase and 
verification process.

 

 

4.5 Secure Erase 

This function erases the unloadable areas complying with NIST 800-88 
Standards.

 

Scroll to select "4.6 Secure Erase ", then press "OK" to start the erasing 
process.

 

 

 

5. Utility 

This menu contains submenus related to device information, system 
information and updates.

 

Scroll to select "5. Utility”, then press "OK" to view the submenus.

 

5.1 Show Disk Info. 

 

This function will display basic information such as device model and capacity. 
Press "OK" to check Power cycle, Temperature, and Power-on hour.

 

Scroll to select "5.1 Disk Info”, then press "OK" to view the connected 
device(s). Next, scroll through to view connected device(s) by port number 
order. Use 

 to check the other port.

 

[02]                      74.5G 
Erase (3) [4M]   

 

    5.2G   

 

Port No.

 

 

Total capacity

 

Erased capacity

 

Erase Round.

 

*The third erase.

 

Erase pattern

 

 

Содержание Pro118






















Отзывы: