Carrier ZS Скачать руководство пользователя страница 41

Страница: 41 / 49

Appendix B: ZS Pro and Pro-F Sensor screen fields

ZS Sensor

Applications Guide

Primary Value Field

The primary value field displays numeric values that are exposed to the ZS sensors or displays text for binary or

multi-state value objects.

Numeric values

- This field can display:

•

A negative symbol

•

Up to 2 decimal places defined by the

Display Resolution

field in an ASVI or AV microblock. If the resolution is

0.5, a small .5 appears as shown above. Any other resolution that shows a decimal uses the decimals

between the large numbers in the Primary Value field.

•

Up to 4 significant digits. The maximum value that can be displayed is 1999.5. If the value to be displayed

exceeds the maximum value, the primary value field will flash the maximum value to indicate the value is

outside of range.

Display text

- 3 alpha characters can be displayed on the screen in the 888 position of the Primary Value field

shown above. Display text can be up to 8 characters, but anything over 3 characters will scroll. The letters K, M, Q,

W, X do not display on a screen.

Effective Setpoints Fields

These fields display the effective setpoint values. They can display a maximum value of 99 or 99.5 if the

Edit

Increment

is set to 0.5. If the effective setpoint exceeds this maximum value or if the

Edit Increment

is set to 0.1,

the value will flash.

TIP

If you need an Edit Increment of 0.1, put the effective setpoints on the Information screen in the Primary

Value field. Hide the effective setpoints on the Home screen by selecting

Sensor Setpoint Adjust Option 4

on the

BACnet Setpoint

microblock's

Rnet

tab.

Rnet Tag Field

The Rnet tag field displays a text indicator (such as

OCC

) or an Rnet tag number (up to 1999) that defines what is

being displayed in the Primary Value field. See:

Icons and text indicators

(page 15)

Appendix A: Rnet tags

(page 32)

Appendix B: ZS Pro and Pro-F Sensor screen fields

Содержание ZS














































Результаты поиска

Содержание ZS

Отзывы:

Бренды по названию

Популярные бренды

Carrier ZS, Инструкция по применению

Результаты поиска

Содержание ZS

Отзывы:

Бренды по названию

Популярные бренды