Adjusting Wireless Adapter and wireless sensor settings
Wireless Sensors
CARRIER CORPORATION ©2018
Installation Guide
All rights reserved
40
The Wireless Adapter and wireless sensors have preconfigured settings in SensorBuilder that you may need to
adjust for your installation.
To edit the Wireless Adapter's settings
1
In the
Driver
pane, right-click
WS Adapter
, and then select
Discover Devices
.
2
In the
Devices
pane, select the Wireless Adapter.
3
Click
Yes
to read its configuration.
4
On the
Device configuration
>
Settings
tab, edit the information as needed. See table below.
5
After you have made edits on the
Settings
tab, right-click the Wireless Adapter in the
Devices
pane, and then
select
Send Configuration
.
Field
Notes
°F
or
°C
Select the format that the Wireless Adapter will use when it sends temperatures to the
i-Vu® application. If you change this setting, you must send the configuration (step 5
above) and then click
Reboot
.
NOTE
If you have i-Vu® controllers loaded with metric applications, you must select
°C
.
Reset
Click to reset the Wireless Adapter to its factory default settings.
Key 1
,
2
,
3
To create security for your Wireless Adapter, you can define keys that a user will have
to enter before SensorBuilder will read the Wireless Adapter's configuration.
The default number for each key is 000. To create new keys, highlight the 3 dots in
each key field, and replace with a number between 000 and 255.
To edit Wireless Adapter settings for sensors
PREREQUISITE
You must have already paired sensors to the Wireless Adapter.
The Wireless Adapter holds the information described below for each sensor. To edit these settings, right-click a
sensor on the Wireless Adapter's
Device configuration
>
Sensors
tab, and then select an option.
Field
Notes
EnOceanID
Every device is given a unique ID number by the manufacturer. (Not editable)
Rnet ID
The sensor's address on the Rnet.
Adjusting Wireless Adapter and wireless sensor settings
Содержание WIRELESS ADAPTER
Страница 65: ......