Carrier RG67N/BGEF, Руководство пользователя

Страница: 9 / 142

09
GB
Follow
Me
or
Smart
eye
Press this button under COOL or HEAT operating Mode Press this button more than 2 seconds
Follow
Me
The controller will display
the actual temp. at its
location and send this
signal to indoor unit every
3 minutes
2s
Follow
Me
The smart eye feature is
energized.
Press this button to activate Follow me. This function can
adjust room temperature base on the controller’s sensor
and make you comfort.
Note:Please put the controller in the location where can
ensure the indoor unit can receive the signal.
Keep pressing this button more than 2 seconds, the
smart eye function is activated and will detects the
people activities in the room. (Model dependent)
LED
or
Fresh
Press LED button Press this button more than 2 seconds
LED
LED
2s
The ionizer or Plasma
dust collector (model
dependent) is energized.
Press this button to turn on and turn off the display on the
indoor unit.
Keep pressing this button more than 2 seconds, the
fresh function is activated and will help to remove
pollen and impurities from the air. (Model dependent)
High
Power
(Turbo)
or
Self
Clean
Press this button Press this button under COOL or DRY Mode more
than 2 seconds
High
Power
The unit will operate at the
biggest capacity output to
reach the setting Temp.
quickly.
2s
High
Power
The unit will enter low
fan mode to dry up the
coil. The cleaning cycle
takes 15~30 mins, after
which the unit will turn off
automatically.
Press this button to activate High Power (Turbo) feature.
It enables the unit to reach the set temperature in
the shortest time. Press it again to disable it. (Model
dependent)
Keep pressing this button more than 2 seconds, the
unit will clean itself to avoid bacteria grow around heat
exchanger. (Model dependent)