Carrier i-Vu CIV-OR, Руководство по установке и запуску

Страница: 13 / 36

Installing the i-Vu® Open Router
i-Vu® Open Router CARRIER CORPORATION ©2020
Installation and Start-up Guide All rights reserved
9
7
Click Open . A window similar to the one below appears.
8
Do one of the following:
○
To change a property value:
a. Type the number of the property, then press
Enter .
b. Type the new value, then press Enter .
○
To take an action, type number of the action, then press Enter .
9
If you changed a value, type
1
, then press Enter to restart the controller.
10
Close PuTTY.
11
Verify that you can communicate with the i-Vu® Open Router by issuing a PING command to the IP address
specified in step 12.
NOTE Your computer must be on the same subnet as the i-Vu® Open Router for the PING command to work.
12
When finished, set the i-Vu® Open Router's Router Config Mode DIP switch to OFF to restore normal
functionality to the Local Access port.
13
Cycle the i-Vu® Open Router's power to accept the Router Config Mode changes.