2--33
62--11161
2.3.4 Crankshaft (Continued)
1. Seam
2. Crankshaft Bearing#1
3. Cylinder Block
A
Dimension
2.3.4.e Replacing Crankshaft Bearing #1
(A) When Removing
1. Press out the crankshaft bearing #1 (2) using a crank-
shaft bearing replacing tool (Refer to Special Tools
1.8.14).
(B) When Installing
1. Clean a new crankshaft bearing #1 (2) and crankshaft
journal bore, and apply engine oil to both.
2. Using the crankshaft bearing replacing tool, press in
the new bearing #1 (2) so that its seam (1) is toward
the exhaust manifold side.
NOTE
Be sure to align the bushing so that the oil hole
in the bushing aligns with the oil port.
Dimension
A
Factory
Specification
0.0 to 0.3 mm
0.0 to 0.118 in.