2--2
62--11161
2.2 DISASSEMBLING AND ASSEMBLING
2.2.1 Draining Coolant
Refer to Section 4.
2.2.2 Draining and Refilling Engine Oil
Refer to Section 3.
2.2.3 External Components
Alternator, Starter and Others
1. Remove the air cleaner and muffler.
2. Remove the engine stop solenoid (1) (if so equipped).
3. Remove the fan (2), fan belt (3), alternator and start-
er.
4. Remove the alternator.
5. Remove the starter.
When Reassembling
Replace the starter.
Replace the alternator.
Replace the fan, fan belt, alternator and starter.
NOTE
When reinstalling the fan, make sure that it is
seated correctly.
Check to see that there are no cracks in the fan
belt.
After reinstaling the fan belt, be sure to adjust
the fan belt tension. (Refer to Section 4.1.1.)
Replace the engine stop solenoid (1) (if so equipped)
and adjust the linkage so that engine stop lever (5) rests
against the stopper (4) when the engine stop solenoid is
not energized. There should be no tension on the
plunger arm (7) when the engine stop solenoid is not
energized. Adjustment is accomplished by loosening
the engine stop mounting screws and moving the
engine stop solenoid (1).
