Installation test
Carrier Connect™
Wi-Fi Thermostat
Carrier Proprietary and Confidential
CARRIER CORPORATION ©2017
Installation Guide
37
All rights reserved
Complete the following to field test the Carrier® Connect™ Wi-Fi Thermostat's outputs.
1
Press the
CHANGE
button to cycle the
MODE
screen through the following settings:
○
HEATING
(default) — not available in a cooling-only configuration
○
EM HEAT
— not available unless a heat pump is configured
○
COOLING
— not available in a heating-only configuration
○
FAN
2
Press the
START
button.
a)
The first stage of
HEATING
,
EM HEAT
,
COOLING
, or
FAN
starts running and the text reads
1ST STAGE:
180
or
FAN ON
and 180 seconds starts counting down.
b)
The
START
button is replaced with a
STOP
button and the
CHANGE
button disappears.
c)
Once the countdown reaches 0, if another stage exists, it starts and the text changes to
2ND STAGE:
180
.
d)
If no other stage exists, the cycle ends, the text disappears, and the
Start
button reappears.
e)
If a third stage exists, it starts running after the second stage countdown reaches 0.
f)
While the
HEATING
and
EM HEAT MODES
are running, if a humidifier has been configured, a
HUM
button
appears below the
STOP
button. If you press the
HU
M button, the text
HUMIDIFYING
appears and turns
on the humidifier.
g)
While the
COOLING
MODE
is running, if a dehumidifier has been configured, a
DEHUM
button appears
below the
STOP
button and, if pressed, the text
DEHUMIDIFYING
appears and the dehumidifier turns on.
h)
Pressing the
STOP
button turns off running equipment, the
STOP
button is replaced with the
START
button, the
CHANGE
button reappears, and the second (stage running and countdown time) and third
lines (humidifying or dehumidifying), are erased.
i)
When you press the
CANCEL
button, any equipment that is running is turned off and the
SYSTEM
SETTINGS
screen displays.
j)
When you press the
HOME
icon, any equipment that is running is turned off and the
HOME
screen
displays.
After 15 minutes of inactivity (no button presses), the installer test stops and the
HOME
screen displays.
Installation test
