Carrier Connect 33CONNECTSTAT43FX, Руководство по установке

Страница: 59 / 70

Appendix A: BACnet Points List
Carrier Connect™ Wi -Fi Thermostat 33CONNECTSTAT43FX CARRIER CORPORATION ©2021
Installation Guide All rights reserved
55
Point Name Point Access Units BACnet Point Name BACnet
Object ID
1=C°
Fan On with W GATED_WRITE 0=NO
1=YES FAN_WITH_W BV:504
Rvs Vlv Energized Ht GATED_WRITE 0=ENERGIZED FOR COOL
1=ENERGIZED FOR HEAT RVS_VLV_DIR BV:505
Humidifier Installed GATED_WRITE 0=NO
1=YES HUM_INST BV:506
BMS Occupancy Enable GATED_WRITE 0=DISABLED
1=ENABLED BMS_OCC_EN BV:507
BACnet Config Write Enable GATED_WRITE 0=DISABLED
1=ENABLED CFG_WR_EN BV:511
ID TEMP SENSOR HIGH READ_ONLY 0=DISABLED
1=ENABLED ID_TEMP_SENS_HI BV:900
ID TEMP SENSOR LOW READ_ONLY 0=INACTIVE
1=ACTIVE ID_TEMP_SENS_LO BV:901
REMOTE SENSOR HIGH READ_ONLY 0=INACTIVE
1=ACTIVE REM_TEMP_HI BV:902
REMOTE SENSOR LOW READ_ONLY 0=INACTIVE
1=ACTIVE REM_TEMP_LO BV:903
HUM TEMP SENSOR HIGH READ_ONLY 0=INACTIVE
1=ACTIVE HUM_TEMP_HI BV:904
HUM TEMP SENSOR LOW READ_ONLY 0=INACTIVE
1=ACTIVE HUM_TEMP_LO BV:905
ID TEMP RANGE HIGH READ_ONLY 0=INACTIVE
1=ACTIVE ID_TEMP_RNG_HI BV:906
ID TEMP RANGE LOW READ_ONLY 0=INACTIVE
1=ACTIVE ID_TEMP_RNG_LO BV:907
HUM SENSOR FAILURE READ_ONLY 0=INACTIVE
1=ACTIVE HUM_SENS_FAIL BV:908
HUMIDITY RANGE HIGH READ_ONLY 0=INACTIVE
1=ACTIVE HUM_TOO_HI BV:909
HUMIDITY RANGE LOW READ_ONLY 0=INACTIVE
1=ACTIVE HUM_TOO_LO BV:910
OUTDOOR SENSOR FAILURE READ_ONLY 0=INACTIVE
1=ACTIVE OD_TEMP_FAIL BV:911
NOT CONNECTED TO
SERVER READ_ONLY 0=INACTIVE
1=ACTIVE SRVR_CONN_FAIL BV:912
NOT CONNECTED TO
ROUTER READ_ONLY 0=INACTIVE
1=ACTIVE RTR_CONN_FAIL BV:913
WIFI HARDWARE FAULT READ_ONLY 0=INACTIVE
1=ACTIVE WIFI_CONF_FAIL BV:914
ECONOMIZER FAULT READ_ONLY 0=INACTIVE
1=ACTIVE ECON_FAULT BV:915
LOCKOUT-5 BAD PIN
ENTRIES READ_ONLY 0=INACTIVE
1=ACTIVE LOCKOUT_FAIL BV:916
Current Mode Status READ_ONLY 1=OFF
2=HEAT
3=COOL CURRENT_MODE MSV:300
User Mode READ_WRITE 1=OFF
2=HEAT
3=COOL USER_MODE MSV:400