Carrier ComfortVu Plus TBPL-H, Инструкция по установке и эксплуатации

Страница: 10 / 71

ComfortVu™ BACnet Thermostat Plus Model TBPL-H (Line voltage)Carrier Proprietary and Confidential CARRIER CORPORATION ©2020
Installation and Operation Guide All rights reserved
6
P79 – Fan VFS High limit in heating
P83 – View T2 temperature sensor readings
P84 – View T3 temperature sensor readings
P85 – Deice in cool – cut-in temperature
P86 – Deice in cool – cut-out temperature
P87 – Deice in heat time
P88 – Deice in heat break time
P89 – Deice in heat – cut-in temperature
P90 – Deice in heat – cut-out temperature
P91 – Compressor delay
P98 – Display set point only (hide room temperature)
P99 – One or Two set points
P100 – Enable screen dimming
P101 – Screen dimming delay
P102 – Dimming brightness
P105 – Screen brightness when ON
P107 – Weekly program configuration
P108 – Weekly program - events per day
P109 – Weekly program event configuration
P114 – Cool PID Kp
P115 – Heat PID Kp P116 – Cool PID Ki
P117 – Heat PID Ki
P118 – Cool PID Kd
P119 – Heat PID Kd
P122 – Cool Proportional output threshold time
P123 – Heat Proportional output threshold time
P160 – Minimum compressor ON time
P161 – Minimum compressor OFF time
P170 – Economizer low limit temperature
P187 – Display or hide humidity reading
P188 – Room temperature limit for disabling dehumidification
in unoccupied mode
P189 – Dehumidification cycle in unoccupied mode
P190 – Dehumidification break time in unocc. mode
P192 – Temperature set-point for re-heat in unoccupied mode
P194 – Humidity differential band
P195 – Humidity sensor reading offset
P196 – Dead zone between humidification and
dehumidification
P197 – Humidity set-point
P198 – Not in use
P200 – Restore defaults