background image

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Catalog No. 04-53330027-01

                       Printed in U.S.A.

Form 33CS-75SI

Pg 1

7-13

Replaces: 33CS-70SI

Installation Instructions

Part Number 33CSCNACHP-01

CONTENTS

Page

SAFETY CONSIDERATIONS

. . . . . . . . . . . . . . . . . . . . . . 1

GENERAL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

PACKAGE CONTENTS

 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

INSTALLATION CONSIDERATIONS

. . . . . . . . . . . . . .1,2

Power

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Wiring

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Thermostat Location

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

INSTALLATION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,3

CONFIGURATION

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-6

Entering and Exiting Configuration Mode

 . . . . . . . . 3

Configuration Options

 . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Exiting Configuration Mode

 . . . . . . . . . . . . . . . . . . . . . . 6

SYSTEM START-UP AND CHECKOUT

 . . . . . . . . . . . . 6

Installer Test Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Terminating Installer Test

 . . . . . . . . . . . . . . . . . . . . . . . . 6

Checklist

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

OPERATION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6,7

Mode Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Fan Selection

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Set Temperature Selection

 . . . . . . . . . . . . . . . . . . . . . . . 6

Batteries

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Display Lighting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Remote Sensor Temperature Display

. . . . . . . . . . . . . 7

Timers

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Five-Minute Compressor Timeguard

 . . . . . . . . . . . . . 7

Minimum On Timer

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Cycle Timer

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Staging Timer

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

TROUBLESHOOTING

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Space Temperature Sensor Failure

. . . . . . . . . . . . . . . 7

Fan Failure

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Memory Failure

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Equipment Outputs

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

WIRING DIAGRAMS

 . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-17

THERMOSTAT CONFIGURATION RECORD

. . . . CL-1

SAFETY CONSIDERATIONS

Read and follow manufacturer instructions carefully. Fol-

low all local electrical codes during installation. All wiring

must conform to local and national electrical codes. Improper

wiring or installation may damage thermostat.

Recognize safety information. This is the safety alert sym-

bol

 . When the safety alert symbol is present on equipment

or in the instruction manual, be alert to the potential for person-

al injury.

Understand the signal words DANGER, WARNING, and

CAUTION. These words are used with the safety alert symbol.

DANGER identifies the most serious hazards which will result

in severe personal injury or death. WARNING signifies a haz-

ard which could result in personal injury or death. CAUTION

is used to identify unsafe practices which would result in minor

personal injury or property damage. 

GENERAL

Carrier’s Comfort Pro non-programmable thermostats are

wall-mounted, low-voltage thermostats that maintain room

temperature by controlling the operation of a heating and/or air

conditioning system (Fig. 1). This thermostat can be used with

a heat pump, air conditioner or water source heat pump opera-

tion. A variety of features are provided including battery opera-

tion, separate heating and cooling set points, auto changeover,

keypad lockout, backlighting, and built-in installer test. 

This Installation Instruction covers installation, configura-

tion, and start-up of the Comfort Pro non-programmable ther-

mostat. For operational details, consult the Owner's Manual for

this specific thermostat.

PACKAGE CONTENTS

1 — Thermostat
1 — Backplate (mounting base)
2 — Screws and anchors

INSTALLATION CONSIDERATIONS

Power  — 

The thermostat will obtain full operating power

one of two ways: full 24 volt AC (50/60 Hz) power via the Rc/

Rh and C terminals or two AA alkaline batteries. The 24 vac

operation is preferred, if available. Battery operation is used

when there are not enough wires to support 24 vac operation.

IMPORTANT: Read entire instruction before installing

the thermostat.

°

F

actual temp

set at

mode

fan

Fig. 1 — Comfort Pro Non-Programmable

 Commercial Thermostat

a33-9224

Comfort™ Pro

Non-Programmable

 Commercial Thermostat

Содержание Comfort Pro 33CSCNACHP-01





















Отзывы: