![Carrier C302 NPR Скачать руководство пользователя страница 25](http://html.mh-extra.com/html/carrier/c302-npr/c302-npr_operating-instructions-manual_2562686025.webp)
21
Model C302 NPR
Operating Procedures
Step 3
Check the scraper blade for any nicks or signs of
wear. If any nicks are present, replace the blade. If
the blade is in good condition, place the clip over the
blade. Place the rear scraper blade and clip over the
single holding pin on the beater (knife edge to the
outside). Holding the blade on the beater, turn it over
and install the front blade the same way.
Figure 8
Step 4
Holding the blades in position, insert the beater
assembly into the freezing cylinder and slide it into
position over the drive shaft. Turn the beater slightly
to be certain that the beater is properly seated.
When in position, the beater will not protrude beyond
the front of the freezing cylinder.
Figure 9
Step 5
Install the white, plastic guide bearing on the short
end of the baffle assembly. Slide the o-ring into the
groove on the long end of the baffle assembly and
lubricate the o-ring. Do not lubricate the guide
bearing.
Figure 10
Step 6
Insert the short end of the baffle assembly into the
pilot hole in the center of the drive shaft. The hole in
the baffle assembly shaft should be rotated to the 12
o'clock position.
Step 7
Assemble the freezer door with the “Ice Buster”
(door spout clearing device). To assemble the door
with the ice buster, install the o-rings on the draw
valve and lubricate.
R
11321
Figure 11
Содержание C302 NPR
Страница 1: ...Model C302 NPR Non Pressurized Slush Freezer Operating Instructions 059661NPR 9 22 06 ...
Страница 51: ...C302 NPR 059680 27N 9 06 ...
Страница 52: ...C302 NPR 059680 33S 9 06 ...