29
If the two indoor units are being installed in the same room and it is desired that they should
operate independently, it is necessary to provide an individual address for each unit, so that
each of them can function by means of its own remote control.
Configuring the Unit
•
Press the button and the remote control and keep them pressed down for
at least 5 seconds.
•
The clock digits show the first configuration item (rAdr = remote address) and
the temperature digits indicate the default value of the respective configuration
item (Ab = control of both indoor units).
•
Press the button to send the new configuration to the unit.
•
Press the button to exit the configuration menu.
Configuring the remote control
•
Press the button and the remote control and keep them pressed down for at least 5
seconds.
•
The clock digits show the first configuration item (CH = remote address) and the
temperature digits show the default value of the respective configuration item
(Ab = control of both indoor units).
•
Press the buttons or to change the default value (Ab) to the new value (A) or (b).
•
Press the button to send the new configuration to the unit.
•
Press the button to exit the configuration menu.
8.7
Selecting the Addresses of the Units
<
<
<
8.8
Emergency Operation
Fig. 31
The emergency button (see Fig. 31) may be used in the event that the wireless remote
control does not work (for example, if the batteries are discharged or the remote control is lost).
To activate emergency mode, keep the emergency button pressed down for at least 5 seconds.
With emergency mode activated, the unit maintains the ambient temperature at 22
o
C as well
as the following conditions:
•
Operating mode: automatic;
•
Fan speed: automatic;
•
Airflow direction vanes: automatic;
•
Timer mode: deactivated.
To deactivate emergency mode, keep the emergency button pressed down for at least 5
seconds (if the problem with the latter has been solved).