Carrier 42/38SHDS050, Руководство по установке, Страница: 11 / 27

e
Page 11
f
Indoor Unit
Installation
Step 4: How to adjust the air inlet direction?
(From rear side to under-side.)
1. Take off ventilation panel and flange .
2. Change the mounting positions of ventilation
panel and air return flange .
Air return flange
Ventilation panel
3. When install the filter mesh, please plug it into
flange as shown in figure below.
NOTE: All the figures in this manual are for
explanation purpose only. They may be slightly
different from the air conditioner you purchased.
The actual unit shall prevail.
Step 5: Fresh air duct installation
Dimension :
Duct joint for fresh air
Ø125mm(4.92”)
Ø160mm(6.3”)
MODLE
18-60
Step 6: Motor and drain pump maintenance
Motor maintain:
Take off the ventilated panel.
Take off the blower housing.
Take off the motor. 1.
2.
3.
(Take rear ventilated as example)
Mofor
Blower housing
Ventilated panel
Pump maintainance:
Screw off four screws from drain pump.
Plug off pump power supply and water level
switch cable.
Take off pump. 1.
2.
3.
Pump
Fig. 4.11
Fig. 4.12
Fig. 4.13
Fig. 4.14
Fig. 4.15
Fig. 4.16
Air return flange
Ventilation panel