:
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
51
F1: DC BUS VOLTAGE TOO LOW
DEFINITION
If DC bus voltage of compressor module P and N is less than 200 VDC for five seconds, relay on the main board is inoperable.
POSSIBLE CAUSES
• Abnormal power supply to power drive board
• Damaged rectifier
• Damaged DC fan motor
• Damaged power drive board or main board
• The communication wire between power drive board and main board is loose
A210293
Fig. 58 —F1 Troubleshooting Chart
Note:
Check the voltage between red and black terminals.
Note:
Check whether the PFC and IPM in power drive are
shorted
.
A210294
Note:
Check whether these three voltage are normal or not
.
A210295