Carrier 30RQS039, Инструкции по установке, эксплуатации и обслуживанию

Страница: 25 / 56

25
7 - PHYSICAL DATA, 30RQSY UNITS
30RQSY 039 045 050 060
070 078 080
090 100 120 140 160
Sound levels
Standard unit - for 160 Pa external static pressure
Sound power level at discharge
(1)
dB(A)
84 84 84 87 87 87 87 87 87 87 90 90
Sound pressure level radiated (1) dB(A)
84 84 84 87 87 87 87 87 87 87 90 90
Sound pressure level at 10 m (2) dB(A) 53 53 53 55 55 55 56 56 56 56
58 58
Dimensions If two values are shown the first one is for standard units and the second one for units with option 23B
Length mm 2142/
2307 2142/
2307 2142/
2307 2142/
2307 2142/
2307 2142/
2307 2273 2273 2273 2273 2273 2273
Width mm 1132/
1297
1132/
1297
1132/
1297
1132/
1297
1132/
1297
1132/
1297
2122 2122 2122 2122 2122 2122
Height without buffer tank module
mm 1371 1371 1371 1371 1371 1371 1371 1371 1371 1371 1371 1371
Height with buffer tank module
mm
1971 1971 1971 1971 1971 1971 1971 1971 1971 1971 1971 1971
Operating weight
(3)
Standard unit without hydronic module
kg 512
519
553 567 567 574 753
921 930 988 1084
1101
Standard unit with hydronic module
Single high-pressure pump kg 542
549 582 596 597
604
783 952 962
1024 1123 1140
Dual high pressure pump kg
568
575
608
622 623 630
809 997
1007 1072 1160 1177
Single high-pressure pump + Buffer tank module option
kg
938 945 978 992 993
1000 1216
1385 1395
1457 1556 1573
Dual high pressure pump + Buffer tank module option
kg
964 971
1004
1018 1019
1026 1242 1430 1440 1505
1593
1610
Compressors Hermetic scroll compressor 48.3 r/s
Circuit A 2 2 2 2 2 2 2 3 3 3 2 2
Circuit B - - - - - - - - - - 2 2
No. of capacity steps
2 2 2 2 2 2 2 3 3 3 4 4
Refrigerant charge
(3)
R-410A
Circuit A kg
12.5 13.5 16.5 17.5 18.0 16.5 21.5 27.5 28.5 33.0 19.0 18.5
teqCO
2
26.1 28.2 34.5 36.5 37.6 34.5 44.9 57.4 59.5 68.9 39.7 38.6
Circuit B kg - - - - - - - - - -
19 18.5
teqCO
2
- - - - - - - - - - 39.7 38.6
Oil charge POE SZ160 (EMKARATE RL-32-3MAF)
Circuit A l
5.8 7.2 7.2 7.2 7.0 7.0 7.2 7.0 7.0 7.0 7.0 7.0
Circuit B l
- - - - - - - - - - 7.0 7.0
Capacity control type
Touch Pilot Junior
Minimum capacity % 50 50 50 50 50 50 50 33 33 33 25 25
Air heat exchangers Grooved copper tubes, aluminium fins
Fans Axial Flying Bird VI fans with rotating shroud
Quantity 1 1 1 1 1 1 2 2 2 2 2 2
Maximum total air flow
l/s
3692 3690 3910 5278 4982
5267 7770
7380
7376
7818 9964
10534
Maximum speed r/s 16 16 16
18 18 18
16 16 16 16
18 18
Water heat exchanger (direct-expansion type) Plate heat exchanger, max. water-side operating pressure without hydronic module 1000 kPa
Water volume l
2.6 3.0 4.0 4.8 4.8 5.6 8.7 8.7 9.9 11.3 12.4 14.7
With hydronic module (option)
Single or dual pump (as selected)
Pump, Victaulic screen filter, safety valve, expansion tank, purge valves (water + air), pressure sensors
Expansion tank volume l 12 12 12 12 12 12 35 35 35 35 35 35
Expansion tank pressure (4)
bar
1 1 1 1 1 1 1
1.5 1.5 1.5 1.5 1.5
Max. water-side operating pressure
kPa 400 400 400 400 400 400 400 400 400 400 400 400
With Buffer tank module (option)
Single or dual pump (as selected)
Pump, Victaulic screen filter, relief valve, expansion tank, purge valves (water + air), pressure sensors
Water volume l 250 250 250 250 250 250 250 250 250 250 250 250
Expansion tank volume l
18 18 18 18 18 18
35 35 35 35 35 35
Expansion tank pressure (4)
bar
1 1 1 1 1 1 1,5 1,5 1,5 1,5 1,5 1,5
Max. water-side operating pressure
kPa 400 400 400 400 400 400 400 400 400 400 400 400
Water connections with / without hydronic module)
Victaulic
Connections inch 2 2 2 2 2 2 2 2 2 2 2 2
Outside diameter mm
60.3 60.3 60.3 60.3 60.3 60.3 60.3 60.3 60.3 60.3 60.3 60.3
Chassis paint colour
Colour code RAL 7035
(1)
In dB ref=10
-12
W, (A) weighting. Declared dualnumber noise emission values in accordance with ISO 4871 (with an associated uncertainty of +/-3dB(A)). Measured in
accordance with ISO 9614-1 and certified by Eurovent.
(2)
In dB ref 20 μPa, (A) weighting. Declared dualnumber noise emission values in accordance with ISO 4871 (with an associated uncertainty of +/-3dB(A)). For information,
calculated from the sound power level Lw(A).
(3)
Weight shown is a guideline only. Please refer to the unit nameplate.
(4)
When delivered, the standard pre-inflation of the tank is not necessarily the optimal value for the system. To permit changing the water volume, change the inflation pressure
to a pressure that is close to the static head of the system. Fill the system with water (purging the air) to a pressure value that is 10 to 20 kPa higher than the pressure in
the tank.