![background image](http://html1.mh-extra.com/html/carrier/09pe/09pe_installation-operation-and-maintenance-instructions_2562558004.webp)
1 - RECEIVING THE UNIT
1.1 - General checks
■ Each unit has a data plate bearing an identification number.
This number must be included in all correspondence. Ensure
that it is the correct unit by checking the purchase order.
■
After unpacking the unit, please inspect it for any damage.
■
If any items are missing or in case of damage, specify this on
the delivery slip and inform the carrier by registered letter within
3 days of delivery of the unit.
1.2 - Unloading
■
The recipient shall be responsible for unloading the equipment and providing the necessary handling equipment (see the section
entitled "LIFTING INSTRUCTIONS").
2 - SAFETY INSTRUCTIONS
■ Any operation must be carried out by qualified personnel using the appropriate Personal Protective Equipment (PPE).
■
Before any operation, read this guide carefully and keep it in a safe place. Safety information must be adhered to.
■
The units must not be run under operating conditions which are more restrictive than those it was designed for (pressure,
temperature, type and circulation of fluids).
■
For units installed in European Community countries, ensure that the entire installation complies with the directives and legislation in force.
■
Respect the instructions for using slings (see the labels on the unit).
■
To prevent any risk of accident, prohibit public access by clearly marking the work area.
2.1 - In an emergency
■
Switch off the electrical supply.
■
The process should not be jeopardised if the emergency stop devices are activated.
■
Switch off the fans.
2.2 - The 4 main risks
■
Lifting or positioning = Accident
■
Contact with the piping = Burns
■
Opening the electrics box = Electrocution
■
Removing the grilles = Injury
3 - GENERAL INFORMATION
3.1 - Unit functions
■
Drycooler
: Device in which a fluid in liquid state is cooled by heat exchange with the ambient air, without direct contact between
the ambient air and the fluid.
■
Condenser
(or air-cooled condenser): Device in which a gas is condensed by heat exchange with the ambient air.
■
Misting option: System for cooling air by misting of water droplets under high pressure.
■ These devices must only be used for the purpose for which they are intended. In particular, it is formally prohibited to use any fluid
other than that specified in the order documents.
3.2 - Standards
■
Every unit meets standards EN 60-204 and EN 14 276-1 as well as the following European directives:
-
Machinery 2006/42 EC
-
EMC 2014/30/EU
-
PED 2014/68/EU
■
Technicians who install, commission, operate and service the unit must understand the instructions given in this manual and be
familiar with the specific technical characteristics of the installation site.
3.3 - Warranty
■
See general terms and conditions of sale.
■
Check the compatibility of the fluid with the equipment being used.
■
To find out the limits of use, refer to the name plate.
4
Содержание 09PE
Страница 27: ......