Carrier Access Access Bank II SNMP, Инструкция по установке и эксплуатации

Страница: 158 / 180

Command Line Interface (CLI)
9/24/01 14-13
dsx0|csu0 .........DSX ( 0’-132’) or CSU 0.0 db
dsx133 ............DSX (133’-265’)
dsx266 ............DSX (266’-398’)
dsx399 ............DSX (399’-532’)
dsx533 ............DSX (440’-550’)
csu7 ..............CSU 7.5 db
csu15 .............CSU 15.0 db
csu22 .............CSU 22.5 db
linetype ...........Set DS1 Line Type
esf ...............ESF Line Type
d4 ................D4 Line Type
linecode ...........Set DS1 Coding Type
ami ...............AMI Line Coding
b8zs ..............B8ZS Line Coding
prm ................Set DS1 Performance Monitor Message Type
ansi ..............ANSI T1.403 ESF PRM
att ...............AT&T 54016 ESF PRM
send ...............Send Test Data on Port
clear .............Clear Test Data Statistics
error .............Inject Single Error on Port
off ...............Stop Send for Normal Operations
loopdown ..........Send In-Band Remote Loop Down
loopup ............Send In-Band Remote Loop Up
statistics ........Display Send Statistics
network ...........Send Pattern Toward Network
[p] [r] .........p - optional pattern
alt - alternating 1/0
d4up - D4 loopup: 00001
d4dn - D4 loopdown: 001
ones - all ones
p1in8 - 00000001
p511 - O.153
p2047 - O.152
p2to15 - O.151
p2to20 - QRSS w/o bit stuffing
p2to23 - O.151
qrss - QRSS pattern (default)
zeros - all zeros
r - optional error rate
0 - disable errors (default)
r=1-7 - error rate of 10^-r
QRSS to net .......ds1 d1 send network > ds1 d1 send network
QRSS
p511 to net .......ds1 d2 send network p511 4
equipment ..........Send Tones to Equipment connected to ds1
[o] ...............Equipment Send Usage:
o - Option for FX PCM
off - turn off test tones