I N S T R U C T I O N S
For the installation and maintenance of D C 1 5 2 5 - D C 1 5 5 0
d e s u p e r h e a t e r s
IMI0049E.doc
Rev.0 20/08/14
20090 SEGRATE (MI)- via E.Fermi
EMAIL:
TEL.(02) 269912.1 - FAX.(02) 2692.2452
Page 7 of 16
7.
TRANSPORT, STORAGE AND HANDLING
Transport
Carraro DS desuperheaters are packed with the utmost care in wooden
crates or cardboard boxes so that they are protected during handling and
transport to their place of installation. The connections are protected to
prevent the entry of dirt. Follow any directions marked on the packaging.
ATTENTION!
Personnel assigned to load-handling activities must take
all the necessary safety precautions.
Storage
The desuperheaters must be stored in a dry environment and protected
against atmospheric conditions. They must not be removed from their
crates or packaging until immediately before installation.
The protective materials on the connections must be left in place until the
last minute. Whether packed or not, the desuperheaters must not be
subject to violent impacts.
Whether packed or not, the desuperheaters must always be stored in an
upright position, i.e. never laid on one side, in order to prevent distortion
or damage to internal components.
Handling
When removing desuperheaters from their packaging and removing the
protective materials from the connections immediately prior to installation,
take the utmost care to prevent foreign matter from entering inside the
desuperheater.
ATTENTION!
When handling desuperheaters, keep the work area clear
in order to prevent damage to property
or injury to persons.
