6
Installation procedure
1
Installation of post and beam
※Be sure to put the corner cap into the corner bracket first when inserting the corner bracket into the post.
The corner cap can t be installed after installing the corner bracket.
2
Installation to base hole
flat-head hole
round hole
※The post has the direction.
Install as below figure.
U-shape
gutter
snow label
(corner parts set)
corner bracket
bracket
corner cap
small truss screw 5×14×10
support
stand
①Insert post into the base hole and fix
with support stand not to fall down.
②Check if it is flat and vertical,and cast concrete.
beam cap
beam
（parts box）
（parts box）
corner cap
（parts box）
hexagon bolt M8×25
（with washer,spring washer）
（parts box）
anchor rod
post
①Put the corner bracket
through the corner cap
into the post and fix with
hexagon bolt M8x25.
②Connect between post
and beam with corner
bracket and fix with
hexagon bolt M8×25
③Put the beam cap into
the beam.
Rear frame
side
Front frame
side
④Put the cap onto the top of
corner bracket and fix with
small truss screw 5x14x10.
※The cap has a round hole
and flat-head hole. Fix the
cap with the round hole.
