19
iMPortAnt sAfety instructions
• Attention: The lamp body can reach high temperatures!
• When in use the lamp body should neither be rolled nor covered up, nor should
it be pressed or tied down to any surface, as the heat generated during operation
needs to dissipate from the whole surface of both rear and front side.
We generally recommend the use of the supplied frame.
• The lamp has NO operating temperature control monitoring /safety shutdown function.
Operating the lamp at temperatures exeeding 80°C (176°F) will damage the unit.
Avoid the operating scenarios mentioned above as well as operating at high ambient
temperatures
• Don´t stick any nails, pins, staples or similar objects into the lamp body, please
use the existing eyelets.
• Do not operate the lamp if you observe any visual damage.
• If any damage is identifiable the relevant parts must be replaced, alternatively, please
contact
cArPetligHt
GmbH or one of our distributors/sales partners.
• Please ensure, when hanging this product, that the lamp body and ancillary equipment
is properly secured using a safety cable.
• Due to the lamp body being one of the lightest of its kind, it allows for installation
in ways not possible before; but please make sure of the stability and reliability of
the attachment.
• Stands must be set up correctly and it is to be ensured that they are designed to
carry the designated load.
• It is advisable to wear suitable protective clothing when working with lamps to
prevent injuries and burns.
• Please observe the weight of lamp bodies and ancillary equipment when carrying or
lifting, and take into consideration preventive measures recommended by local trade
Associations according to occupational safety law.
• When laying out the connecting cables please avoid tripping dangers for personnel or
damages that can occur from vehicles by using suitable warning signs and/or coverings.
• The lamp body and its electrical safety system are to be inspected prior to any operation.
• The faultlessness of the power supply and the safety device connection to the
lamp body is to be checked before every operation.
• Please ensure that the correct safety distance to sensitive and flammable objects is
observed, the maximum heat is generated at the backside of the lamp!
Beware: Mains Voltage!
Acute danger to life!
Beware: Hot lamp!
