Intended Use
The e.Box is intended exclusively for the operation of electrical appliances / consumers.
The max. specified continuous power (200 watts) of the built-in inverter sets the max. possible power
consumption of the connected electrical appliances (consumers) to the 230 V socket. Before starting
up, make sure that the max. Current consumption of the consumer is not above the nominal output
current of the inverter. This information can be found on the rating plate or in the technical data of the
respective connected consumer.
Recommended method of carrying
The e.Box is equipped with a folding handle. When carrying the recess should always point to the body
to prevent over-rotation of the handle. Due to the high dead weight of 11 kg, we do not recommend
carrying the e.Box over long distances. If necessary, it should be stowed away for transport on a trol-
ley.
Charging the e.Box
The e.Box has 2 pole terminals on the top which are directly connected to the built-in 36 Ah battery. A
charger for 12 volt AGM batteries can be connected directly here. The charger must work with a final
charging voltage of at least 14.7 volts, otherwise the battery will not be fully charged. The maximum
charge current should not exceed 5 amperes. We recommend the use of the charger Longex BL 12-5,
which fulfills the requirements described above.
The e.Box in cycle mode
Capacity depending on the ambient temperature
Содержание e.Box
Страница 1: ...Operating instructions ...
Страница 2: ......