Carp Sounder e.Box, Руководство по эксплуатации

Страница: 5 / 8

Connections of the e.Box
The 230 V socket
The e.Box is equipped with a 230 volt socket, which is powered by a built-in inverter. Always insert the
plug of your appliance firmly into the e.Box.
Make sure that the power consumption of the consumer does not exceed the maximum possible cont-
inuous power output of 200 W.
The AC output waveform of the 230V output is referred to as a „modified sine wave“. It is a stepped
waveform that is designed to have similar characteristics to the sine waveform from the supply current.
A waveform of this type is suitable for a wide range of applications. The modulated sine wave produced
by the e.Box has an effective voltage of 220-240 volts, equal to the normal household voltage.
Most (digital and analog) AC voltmeters are more sensitive to the mean of the waveform than to the
RMS value. They are calibrated to RMS voltage on the assumption that the measured waveform is a
pure sine wave. These gauges do not accurately reflect the rms voltage of a modified sine wave. They
indicate 20 to 30 volts less when measuring at the output. To accurately measure the output voltage,
use a voltmeter that reduces true RMS values.
Devices with sensitive electronics should not be operated with a modified sine wave as this form of
voltage is not sufficiently constant. These devices could be damaged. In case of doubt, please inform the
manufacturer of the device to be connected in advance.
Inductive loads, such as Refrigerators, compressors and pumps require more power for their commissi-
oning than the specified nominal value of the consumer. It may require 2 to 8 times the nominal watts.
Since the characteristics of inductive loads vary greatly from consumer to consumer, it must be deter-
mined in tests whether a specific load can be started. If the inverter is overloaded, it simply shuts off.
12 V connection
Suitable for all devices that can be operated or charged via the 12V socket in the car (for example, por-
table TVs, MP3 / DVD players, cameras, etc.) The maximum output current is 16 amperes.
USB ports
At the two USB ports, small consumers can be operated or charged with a USB plug (for example, a
laptop lamp, mobile phone or tablet). The USB port delivers 5 volts with up to max. 1,000 mA and is not
Data port.
Binding posts
The pole terminals are connected directly to the built-in 36 Ah battery. They are suitable for the direct
connection of 12 V devices such as Echo sounder, electric boat engine or electric reels thought. The
maximum output current is 60 amps. The pole terminals are NOT protected against short circuits.