Carotron P22194-1, Инструкция по эксплуатации

Страница: 15 / 28

TP14 : I DEMAND - CURRENT
DEMAND
The summation of the Speed
Reference and Speed Feedback signals
produces the Current Demand signal.
TP15 : OC - OVER CURRENT
SETPOINT
This signal is the setting of P9, Over
Current Trip.
TP16 : VP - VELOCITY
PROPORTIONAL
This is the velocity loop
proportional signal before it is
combined with the velocity integral
signal to give the Torque reference
signal.
TP17 : VI - VELOCITY INTEGRAL
This is the velocity loop integral
signal before it is combined with the
velocity proportional signal to give the
Torque reference signal.
TP18 : TFB - SCALED
TACHOMETER VOLTAGE
The tachometer voltage is scaled to
a 5 volt level at motor base speed and
used for velocity feedback in the TFB
mode.
TP19 : START (RUN)
ACCEL/DECEL
The Start Accel/Decel circuit output
shows the RUN reference as rate
controlled by the P12, ACCEL and P13,
DECEL pots.
TP20 : JOG ACCEL/DECEL
The Jog Accel/Decel circuit output
shows the Jog reference as rate
controlled by the P7, ACCEL/DECEL
pot.
14