7404-10 Operations Manual
Rev A 7/25/2014
Page 58 of 82
SECTION 9 – ALERTS
Alert System Overview
The incubator control system is equipped with an Alert system that constantly monitors
features of the incubator and to notify the user if the incubator needs any type of service
that may need done, to ensure good running performance of the incubator. The intent is
to notify the user that the incubator needs attention thus minimizing the risk of a failure
or alarm condition. Some of the alert features are replace the atomizers (humidified
units only), replace the air filter, and equipment calibration is due.
Notification occurs via an Alert icon on the status bar. When the Alert icon is pressed, a
pop up window will display the alert condition(s). Each alert condition parameter is
factory pre-set, no adjustment is necessary. The Alerts are cleared through the
Maintenance screen.
Press the
(Alert icon).
The Alert pop up window will appear displaying the alert message.
Alert icon
