2050 Operations Manual
Rev L 2/2/2018
Page 21 of 22
SECTION 10 – TROUBLESHOOTING
Problem -- Unit will not turn on
•
Is the unit connected to an electrical circuit as defined in the installation section?
•
Is there power at the electric outlet the unit is plugged into?
•
Is the unit’s power switch turned on?
•
Is the fuse blown?
Problem -- Temperature is above setpoint
•
Is the condenser filter on the top of the unit clean?
•
Is the pump agitating fluid inside the reservoir?
•
Is the fluid rated for the temperature being set (ie. water only at temperatures above
10ºC)
Problem -- Temperature is below setpoint
•
Has the over temperature safety shut-off tripped?
•
Is the pump agitating fluid inside the reservoir?
•
Is there sufficient fluid inside the reservoir (low level alarm on)?
Problem – No external circulation
•
Are the external circulation fittings connected properly?
•
Is the pump agitating fluid inside the reservoir?
•
Does the fluid have free-flow though the external tubing (<2 psig pressure drop)
Содержание 2050
Страница 1: ......
Страница 20: ...2050 Operations Manual Rev L 2 2 2018 Page 20 of 22 ELECTRICAL SCHEMATICS ...