Humidifiers
www.carnes.com
G-23
Humidifiers | Accessories
STEAM HOSE
CONDENSATE RETURN LINE
Carnes steam hose is made from EPDM compound to
withstand the low pressure steam without deterioration.
Model HXSAB steam hose has an I. D. of 7/8” for use
with units that use “AX” or “B” steam cylinders. Model
HXSAC has an I. D. of 1-5/8” for use with units that use
“C” cylinders. The hose may be easily cut to the exact
length at time of installation.
Steam hose drain “T” are available for use when the duct
is located below the top of the humidifier or where the
length of steam hose is in excess of 12 feet.
In some applications it may be desirable to have the
steam generator cylinder feed two steam distributor
pipes. “T” fittings can be installed in the steam hose and
condensate return line.
Two models of condensate return line are available.
Model HXRA has an I. D. of 3/8” and is used whenever
steam distributor pipes are used with the humidifier.
Model HXLA has an I. D. of 5/8” and is used with optional
fan distribution units.
STEAM HOSE DRAIN “T” FITTINGS
“T” FITTINGS
Humidifier Model
Drain “T” Model
Dimensions
HBA, HCA
HBD,
HCD
HXTABB 7/8”x7/8”x3/8”
HBG, HCG
HBH,
HCH
HXTACB 1-5/8”x1-5/8”x3/8”
Humidifier Model Drain “T” Model
Dimensions
HBA, HCA
HBD,
HCD
HXTABA 7/8”x7/8”x7/8”
HBG, HCG
HBH,
HCH
HXTACA 1-5/8”x1-5/8”x1-5/8”
STEAM HOSE “T” FITTINGS
Humidifier Model
Drain “T” Model
Dimensions
ALL HXTAD
3/8”x3/8”x3/8”
CONDENSATE HOSE “T” FITTINGS
