Styling Tips and Instructions for Use
1. Wash and condition your hair, then towel dry.
2. Attach styling nozzle firmly on to the end of the dryer.
3. Start styling your hair at the back and work towards the front.
4. After using the styling nozzle let it cool down before removing it from
the dryer, or remove using a towel.
Tip: Use EHC Thermal Protect to provide protection and moisture while
drying
Blow Drying (without the styling nozzle)
1. Hold the dryer about 20 centimetres (8 inches) away from the hair
while drying.
2. For extra fullness, when your hair is almost dry, bend forward to hold
your head upside down, and direct the airflow up from underneath, and
move it to and fro. Beware of bending over too far, so as to avoid
injury.
Ionic technology
1. Anti-static hair drying
2. Creates silky smooth hair
3. Dries hair faster
4. Adds a natural shine to hair
Styling Nozzle
1. The styling nozzle concentrates the airflow on to a small area of hair for
fast, easy styling.
2. It is ideal for blow drying with a comb and styling brush.
3. Divide the hair into small sections and point the dryer along the shafts
from the root to the ends, to give a smooth professional finish to the
hair.
Cool Shot
1. To set your style, depress the Cool Shot button and hold for about 15
seconds after styling a section of hair.
2. You can use the Cool Shot button regardless of Speed setting.
3. Once selecting the Cool Shot, the air should cool down immediately.
4. When curling your hair with a round brush, use the Cool Shot for about
15 seconds after drying, to set the curl.
Heat Selection
You may have you own preferences, but as a general guide, use the Heat
Setting
III
(HOT) for rough-drying, and for thicker heavier hair.
Use Heat Setting
II
(WARM) or Heat Setting
I
(COOL) for finer hair, and for
more precise control when styling.
Содержание IONIC 2200W
Страница 1: ......
